Nissan Juke Service and Repair Manual : Quick Connector

CAUTION:
• After connecting fuel tube quick connectors, check quick connectors are secure.

• Ensure that connector and resin tube never contact any adjacent parts.

    Inspection
    Inspect fuel lines, fuel filler cap, and fuel tank for improper attachment, leakage, cracks, damage, loose connections, chafing or deterioration. A : Engine B : Fuel line C : Fuel tank If necessa ...

    Other materials:

    Cooling fan
    Exploded View 1. Fan motor 2. Fan shroud 3. Cooling fan A. Apply on fan motor shaft : N·m (kg-m, in-lb) : Apply genuine high strength thread locking sealant or equivalent. Removal and Installation REMOVAL 1. Drain engine coolant. Refer to CO-11, "Draining". CAUTION: • Pe ...

    General Precauti
    • Always use a 12 volt battery as power source. • Do not attempt to disconnect battery cables while engine is running. • Before connecting or disconnecting the ECM harness connector, turn ignition switch OFF and disconnect negative battery cable. Failure to do so may damage the ECM because bat ...

    Precaution Necessary for Steering Wheel Rotation after Battery Disconnect
    NOTE: • Before removing and installing any control units, first turn the ignition switch to the LOCK position, then disconnect both battery cables. • After finishing work, confirm that all control unit connectors are connected properly, then re-connect both battery cables. • Always use CONS ...