Nissan Juke Service and Repair Manual : Ecu diagnosis information

Nissan Juke Service and Repair Manual / Mirrors / Ecu diagnosis information

BCM (BODY CONTROL MODULE)

List of ECU Reference

Wiring diagram


    Diagnosis system (BCM)
    Common item COMMON ITEM : CONSULT-III Function (BCM - COMMON ITEM) APPLICATION ITEM CONSULT-III performs the following functions via CAN communication with BCM. SYSTEM APPLICATION BCM can perfo ...

    Other materials:

    P1830 ABS operation signal
    DTC Logic DTC DETECTION LOGIC DTC CONFIRMATION PROCEDURE 1.DTC REPRODUCTION PROCEDURE With CONSULT-III 1. Start the engine and drive at 30 km/h (19 MPH) or more. 2. Perform self-diagnosis for “ALL MODE AWD/4WD”. Is DTC “P1830” detected? YES >> Proceed to diagnosis procedure. Refer ...

    Steering switch ground circuit
    Description Transmits the steering switch signal to audio unit. Diagnosis Procedure 1.CHECK STEERING SWITCH SIGNAL GROUND CIRCUIT 1. Disconnect audio unit connector and spiral cable connector. 2. Check continuity between audio unit harness connector and spiral cable harness connector. Is t ...

    P0171 fuel injection system function
    DTC Logic DTC DETECTION LOGIC With the Air/Fuel Mixture Ratio Self-Learning Control, the actual mixture ratio can be brought closely to the theoretical mixture ratio based on the mixture ratio feedback signal from the A/F sensor 1. The ECM calculates the necessary compensation to correct the ...