Diagnosis system (BCM)

Common item : consult-III Function (BCM - COMMON ITEM) APPLICATION ITEM CONSULT-III performs the following functions via CAN communication with BCM. SYSTEM APPLICATION BCM can perform the follow ...

Wiring diagram

MANUAL HEATER SYSTEM Wiring Diagram For connector terminal arrangements, harness layouts, and alphabets in a (option abbreviation; if not described in wiring diagram), refer to GI-12, "Connec ...

Other materials:

Unit removal and installation
Transaxle assembly Exploded View 1. CVT fluid level gauge 2. CVT fluid charging pipe 3. O-ring 4. Transaxle assembly 5. Air breather hose A. For tightening torque, refer to TM-301, "Removal and Installation". Removal and Intallation REMOVAL WARNING: Never remove the reservo ...

Precaution Necessary for Steering Wheel Rotation after Battery Disconnect
NOTE: • Before removing and installing any control units, first turn the ignition switch to the LOCK position, then disconnect both battery cables. • After finishing work, confirm that all control unit connectors are connected properly, then re-connect both battery cables. • Always use CONS ...

B2578, B2579 In-vehicle sensor
DTC Logic DTC DETECTION LOGIC NOTE: • If DTC is displayed along with DTC U1000, first perform the trouble diagnosis for DTC U1000. Refer to HAC- 141, "DTC Logic". • If DTC is displayed along with DTC U1010, first perform the trouble diagnosis for DTC U1010. Refer to HAC- 142, &qu ...