Preload Torque

Companion Flange Runout

Other materials:

MR16DDT : Removal and Installation
REMOVAL 1. Disconnect the battery cable from the negative terminal. Refer to PG-124, "Removal and Installation". 2. Drain engine coolant from radiator. Refer to CO-11, "Draining". 3. Remove charge air cooler. Refer to EM-31, "Removal and Installation". 4. Remove C ...

Take away warning does not operate
Diagnosis Procedure 1.CHECK DTC WITH BCM AND COMBINATION METER Check that DTC is not detected with BCM and combination meter. Is the inspection result normal? YES >> GO TO 2. NO-1 >> Refer to BCS-67, "DTC Index". (BCM) NO-2 >> Refer to MWI-36, "DTC Index&qu ...

Precaution Necessary for Steering Wheel Rotation after Battery Disconnect
NOTE: • Before removing and installing any control units, first turn the ignition switch to the LOCK position, then disconnect both battery cables. • After finishing work, confirm that all control unit connectors are connected properly, then re-connect both battery cables. • Always use CONS ...