Nissan Juke Service and Repair Manual : Wiring diagram
METER SYSTEM
Wiring Diagram
For connector terminal arrangements, harness layouts, and alphabets in a
(option abbreviation; if not
described in wiring diagram), refer to GI-12, "Connector Information/Explanation
of Option Abbreviation".
IPDM E/R
List of ECU Reference ...Basic inspection
DIAGNOSIS AND REPAIR WORKFLOW (METER SYSTEM) Work flow OVERALL SEQUENCE • Reference 1···MWI-22, "On Board Diagnosis Function". • Reference 2···MWI-36, "DTC Index". • Referen ...Other materials:
Door does not lock/unlock with keyfob
Diagnosis Procedure
1.CHECK POWER DOOR LOCK OPERATION
Check power door lock operation.
Does door lock/unlock with door lock and unlock switch?
YES >> GO TO 2.
NO >> Go to DLK-534, "ALL DOOR : Diagnosis Procedure".
2.CHECK REMOTE KEYLESS ENTRY RECEIVER
Check remote ...
Tire Pressure Monitoring System (TPMS)
This vehicle is equipped with the Tire Pressure Monitoring System (TPMS). It
monitors tire pressure of all tires except the spare. When the low tire pressure
warning light is lit, and the CHECK TIRE PRES (pressure) warning message is displayed
in the vehicle information display, one or more of ...
B2193 chain of ECM-IMMU
DTC Logic
DTC DETECTION LOGIC
NOTE:
• If DTC B2193 is displayed with DTC U1000, first perform the trouble diagnosis
for DTC U1000. Refer to
BCS-153, "DTC Logic".
• If DTC B2193 is displayed with DTC U1010, first perform the trouble diagnosis
for DTC U1010. Refer to
BCS-154, " ...