Nissan Juke Service and Repair Manual : Wiring diagram

SECURITY CONTROL SYSTEM

LHD

LHD : Wiring Diagram

For connector terminal arrangements, harness layouts, and alphabets in a described in wiring diagram), refer to GI-12, "Connector Information/Explanation(option abbreviation; if not
described in wiring diagram), refer to GI-12, "Connector Information/Explanation of Option Abbreviation".



RHD


RHD

RHD : Wiring Diagram

For connector terminal arrangements, harness layouts, and alphabets in a described in wiring diagram), refer to GI-12, "Connector Information/Explanation(option abbreviation; if not
described in wiring diagram), refer to GI-12, "Connector Information/Explanation of Option Abbreviation".



Basic inspection


    ECU diagnosis information
    ECM, BCM List of ECU Reference ...

    Other materials:

    Power supply and ground circuit
    Diagnosis Procedure 1.CHECK FUSES AND FUSIBLE LINK Check that the following IPDM E/R fuses or fusible links are not blown. Is the fuse fusing? YES >> Replace the blown fuse or fusible link after repairing the affected circuit if a fuse or fusible link is blown. NO >> GO TO 2. ...

    Electric controlled coupling
    Exploded View 1. Sub-harness 2. Rear final drive assembly 3. Electric controlled coupling (right) 4. Reamer bolt 5. Electric controlled coupling (left) A. Gear carrier mouting face : Vehicle front : N·m (kg-m, ft-lb) : Apply Genuine Liquid Gasket 1217 or equivalent. Removal and Inst ...

    P1610 lock mode
    Description ECM forcibly switches to the mode that inhibits engine start, when engine start operation is performed 5 times or more while communication between ECM and BCM is not normal. DTC Logic DTC DETECTION LOGIC DTC CONFIRMATION PROCEDURE 1.PERFORM DTC CONFIRMATION PROCEDURE 1. Turn i ...