Nissan Juke Service and Repair Manual : Wiring diagram
Ecu diagnosis information
TCM Reference Value CONSULT-III DATA MONITOR STANDARD VALUE • In CONSULT-III, electric shift timing or lock-up timing, i.e. operation timing of each solenoid valve, is displayed. Therefore, if ...CVT control system
Wiring diagram For connector terminal arrangements, harness layouts, and alphabets in a (option abbreviation; if not described in wiring diagram), refer to GI-12, "Connector Information/Expla ...Other materials:
B1120 satellite sensor LH
DTC Logic
DTC DETECTION LOGIC
DTC CONFIRMATION PROCEDURE
1.CHECK SELF-DIAG RESULT
With CONSULT-III
1. Turn ignition switch ON.
2. Perform “Self Diagnostic Result” mode of “AIR BAG” using CONSULT-III.
Without CONSULT-III
1. Turn ignition switch ON.
2. Check the air bag warning lamp statu ...
Glow plug
Exploded View
1. Glow plug
Engine front
: N·m (kg-m, ft-lb)
Removal and Installation
REMOVAL
CAUTION:
Remove glow plug only if necessary. If carbon adheres, it may be stuck and
broken.
1. Disconnect the battery cable from the negative terminal.
2. Remove cowl top extension. Refer to EX ...
Diagnosis system (multi display unit)
CONSULT-III Function
APPLICATION ITEM
CONSULT-III performs the following functions via CAN communication with multi
display unit.
SELF DIAGNOSTIC RESULT
Refer to AV-111, "DTC Index".
DATA MONITOR
• *1: MR16DDT
• *2: This is not used to determine ON/OFF of the indicator lam ...