System

Starting system (with intelligent key) : System Diagram *1: M/T models *2: CVT models Starting system (with intelligent key) : System Description CVT MODELS • When selector lever is P or N, pow ...

Starting system (with intelligent key)

CVT : Wiring Diagram For connector terminal arrangements, harness layouts, and alphabets in a (option abbreviation; if not described in wiring diagram), refer to GI-12, "Connector Information/ ...

Other materials:

Evaporative emission system
Inspection 1. Visually inspect EVAP vapor lines for improper attachment and for cracks, damage, loose connections, chafing and deterioration. 2. Check EVAP canister as follows: a. Block port (B). Orally blow air through port (A). Check that air flows freely through port (C). b. Block port (A ...

P1864 input speed signal
DTC Logic DTC DETECTION LOGIC DTC CONFIRMATION PROCEDURE 1.PRECONDITIONING If “DTC CONFIRMATION PROCEDURE” has been previously conducted, always turn ignition switch OFF and wait at least 10 seconds before conducting the next test. >> GO TO 2. 2.DTC REPRODUCTION PROCEDURE With ...

Brake pedal
Inspection and Adjustment INSPECTION Brake Pedal Height Check the height (H1) between the dash lower panel (1) and the brake pedal upper surface. H1 : Refer to BR-70, "Brake Pedal". CAUTION: Remove the floor trim. Stop Lamp Switch Check the clearance (C) among the brake pedal le ...