Nissan Juke Owners Manual : Wheels

Wash the wheels when washing the vehicle to maintain their appearance.

• Clean the inner side of the wheels when the wheel is changed or the underside of the vehicle is washed.

• Inspect wheel rims regularly for dents or corrosion. Such damage may cause loss of pressure or poor seal at the tire bead.

• NISSAN recommends that the road wheels be waxed to protect against road salt in areas where it is used during winter.

CAUTION

Do not use abrasive cleaners when washing the wheels.

    Glass
    Use glass cleaner to remove smoke and dust film from the glass surfaces. It is normal for glass to become coated with a film after the vehicle is parked in the hot sun. Glass cleaner and a soft cl ...

    Aluminum alloy wheels
    Wash regularly with a sponge dampened in a mild soap solution, especially during winter months in areas where road salt is used. Salt could discolor the wheels if not removed. CAUTION Follow the ...

    Other materials:

    Key reminder function does not operate
    Diagnosis Procedure 1.CHECK DTC WITH BCM Check that DTC is not detected with BCM. Is the inspection result normal? YES >> GO TO 2. NO >> Refer to BCS-67, "DTC Index". 2.CHECK “ANTI KEY LOCK IN FUNCTI” SETTING IN “WORK SUPPORT” 1. Select “INTELLIGENT KEY” of “BCM” u ...

    P1205 exhaust fuel injector
    DTC Logic DTC DETECTION LOGIC Diagnosis Procedure 1.CHECK EXHAUST FUEL INJECTOR POWER SUPPLY CIRCUIT FOR OPEN AND SHORT 1. Turn ignition switch OFF. 2. Disconnect exhaust fuel injector harness connector. 3. Turn ignition switch ON. 4. Check the voltage between exhaust fuel injector harness ...

    Auto door lock operation does not operate
    Diagnosis Procedure 1.CHECK “AUTO LOCK SET” SETTING WITH CONSULT-III 1. Select “MULTI REMOTE ENT” of “BCM” using CONSULT-III. 2. Select “AUTO LOCK SET” in “WORK SUPPORT” mode. 3. Check “AUTO LOCK SET” in “WORK SUPPORT”. Refer to DLK-502, "MULTI REMOTE ENT : CONSULT-III Function (BCM - MU ...