Nissan Juke Service and Repair Manual : Washer switch

Component Inspection

1.CHECK WASHER SWITCH

1. Turn ignition switch OFF.

2. Disconnect combination switch connector.

3. Check continuity between the combination switch terminals.

A : Terminal 4
B : Terminal 6
C : Terminal 3
D : Terminal 1


Is the inspection result normal?


Is the inspection result normal? YES >> INSPECTION END

NO >> Replace combination switch (Wiper and washer switch).

    Light & rain sensor
    Component Function Check 1.CHECK FRONT WIPER AUTO OPERATION 1. Clean rain sensor detection area of windshield fully. 2. When the front wiper switch is turned to AUTO position, front wiper operates ...

    Rear wiper motor circuit
    Component Function Check 1.CHECK REAR WIPER ON OPERATION CONSULT-III ACTIVE TEST 1. Select “RR WIPER” of BCM active test item. 2. With operating the test item, check rear wiper operation. On : Re ...

    Other materials:

    RHD
    RHD : Wiring Diagram For connector terminal arrangements, harness layouts, and alphabets in a (option abbreviation; if not described in wiring diagram), refer to GI-12, "Connector Information/Explanation of Option Abbreviation". ...

    Windshield glass
    Exploded View 1. Windshield glass molding 2. Dam rubber (upper) 3. Upper clip 4. Windshield glass 5. Dam rubber (lower) 6. Lower clip 7. Mirror base 8. Rain sensor bracket 9. Adhesive 10. Roof panel 11. Headlining assembly 12. Primer 13. Cowl top cover 14. Cowl top panel 1 ...

    Unit removal and installation
    TRANSMISSION ASSEMBLY Exploded View 1. Transaxle assembly A: : For the tightening torque, refer to TM-508, "Removal and Installation". Removal and Installation REMOVAL WARNING: Never open the radiator cap or drain plug when the engine is hot. Hot liquid may spray out, causing s ...