Nissan Juke Owners Manual : Vehicle Security System
The vehicle security system provides visual and audio alarm signals if someone opens the doors, or lift gate when the system is armed. It is not, however, a motion detection type system that activates when a vehicle is moved or when a vibration occurs.
The system helps deter vehicle theft but cannot prevent it, nor can it prevent the theft of interior or exterior vehicle components in all situations.
Always secure your vehicle even if parking for a brief period. Never leave your keys in the vehicle, and always lock it when unattended. Be aware of your surroundings, and park in secure, well-lit areas whenever possible.
Many devices offering additional protection, such as component locks, identification markers, and tracking systems, are available at auto supply stores and specialty shops. Your NISSAN dealer may also offer such equipment.
Check with your insurance company to see if you may be eligible for discounts for various theft protection features.
How to arm the vehicle security system
1. Close all windows.
The system can be armed even if the windows are open.
2. Models with Intelligent Key system: Place the ignition switch in the OFF position and remove the Intelligent Key from the vehicle.
Models without Intelligent Key system: Place the ignition switch in the LOCK position and remove the key.
3. Close all doors. Lock all doors. The doors can be locked with:
• the LOCK button on the keyfob
or Intelligent Key (if so equipped)
• any request switch (Intelligent Key equipped model)
• the power door lock switch
• the key — master or mechanical (Intelligent Key equipped model)
4. Confirm that the security indicator light illuminates. The security indicator light stays on for about 30 seconds. The vehicle security system is now pre-armed. After about 30 seconds the vehicle security system automatically shifts into the armed phase. The security light begins to flash once every approximately 3 seconds. If, during this 30-second pre-arm time period, the door is unlocked, or the ignition switch is placed in the ACC or ON position, the system will not arm.
Even when the driver and/or passengers are in the vehicle, the system will activate with all doors locked with the ignition switch in the LOCK position. When turning the ignition switch to the ACC or ON position, the system will be released.
Vehicle security system activation The vehicle security system will give the following alarm:
• The headlights blink and the horn sounds intermittently.
• The alarm automatically turns off after approximately 50 seconds. However, the alarm reactivates if the vehicle is tampered with again.
The alarm is activated by:
• Unlocking the door without using the keyfob, the Intelligent Key (if so equipped) the request switch (if so equipped) or the key.
(Even if the door is opened by releasing the door inside lock knob, the alarm
will activate.) How to stop an activated alarm The alarm will stop by unlocking
a door by pushing the UNLOCK button
on the keyfob or Intelligent Key, pushing the request switch or using the key. The
alarm will not stop if the ignition switch is placed in the ACC or ON position.
If the system does not operate as described above, have it checked by a NISSAN dealer.
Security systems
Your vehicle has two types of security systems, as follows: • Vehicle security system • NISSAN Vehicle Immobilizer System The security condition will be shown by the security indicator light. ...NISSAN Vehicle Immobilizer System
The NISSAN Vehicle Immobilizer System will not allow the engine to start without the use of the registered key. If the engine fails to start using the registered key, it may be due to interference ...Other materials:
Diagnosis system (combination meter)
On Board Diagnosis Function
ON BOARD DIAGNOSIS ITEM
The combination meter allows the following diagnosis items with the on-board
diagnosis function.
METHOD OF STARTING
1. Turn ignition switch ON, and switch the trip meter to “trip A” or “trip
B”.
2. Turn ignition switch OFF.
3. While pre ...
Diagnosis system (multi display unit)
CONSULT-III Function
APPLICATION ITEM
CONSULT-III performs the following functions via CAN communication with multi
display unit.
SELF DIAGNOSTIC RESULT
Refer to AV-111, "DTC Index".
DATA MONITOR
• *1: MR16DDT
• *2: This is not used to determine ON/OFF of the indicator lam ...
U1000 can comm circuit
Description
CAN (Controller Area Network) is a serial communication line for real time
application. It is an on-vehicle multiplex
communication line with high data communication speed and excellent error
detection ability. Many electronic
control units are equipped onto a vehicle, and each co ...