Nissan Juke Service and Repair Manual : Unit removal and installation
TRANSFER ASSEMBLY
4WD mode switch
Removal and Installation REMOVAL 1. Remove instrument lower panel. Refer to IP-12, "Exploded View". 2. Remove 4WD mode switch. INSTALLATION Install in the reverse order of removal. ...Exploded View
1. Transfer gusset 2. Transfer assembly 3. Heat insulator : Vehicle front : N·m (kg-m, ft-lb) ...Other materials:
Shift P warning lamp
Component Function Check
1.CHECK FUNCTION
1. Select “INTELLIGENT KEY” of “BCM” using CONSULT-III.
2. Select “LCD” in “ACTIVE TEST” mode.
3. Check that the function operates normally according to the following
conditions.
Is the inspection result normal?
YES >> Shift P warning lamp is ...
Lubricant
Description
MAINTENANCE OF LUBRICANT LEVEL
The compressor lubricant is circulating in the system together with the
refrigerant. It is necessary to fill compressor
with lubricant when replacing A/C system parts or when a large amount of
refrigerant leakage is
detected. It is important to alwa ...
Basic inspection
Radiator
Inspection
Check radiator for mud or clogging. If necessary, clean radiator as follows.
CAUTION:
• Be careful not to bend or damage the radiator fins.
• When radiator is cleaned without removal, remove all surrounding parts such as
radiator fan, radiator
shroud and horns. Then tap ...