Inspection

INSPECTION AFTER REMOVAL Oil Cooler Check oil cooler for cracks. Check oil cooler for clogging by blowing through engine coolant inlet. If necessary, replace oil cooler assembly. INSPECTION AFTE ...

Exploded View

1. O-ring 2. Oil pan (upper) 3. Oil level gauge guide 4. O-ring 5. Oil level gauge 6. Oil pump drive chain 7. Crankshaft sprocket 8. Oil pump sprocket 9. Oil pump chain tensioner 10. ...

Other materials:

Additional service when removing battery negative terminal
Description • The audio unit is equipped with the anti-theft system. • The audio unit operates after authenticating a fixed four-digit anti-theft code. • After removing the battery of the audio unit, the authentication of the anti-theft code is required. Work Procedure 1.POWER SWITCH ON 1. ...

Ignition position warning function does not operate
Diagnosis Procedure 1.CHECK DTC WITH BCM Check that DTC is not detected with BCM. Is the inspection result normal? YES >> GO TO 2. NO >> Refer to BCS-67, "DTC Index". 2.CHECK POWER DOOR LOCK OPERATION Check power door lock operation. Does door lock/unlock with d ...

Component parts
Component Parts Location 1. Back door lock assembly 2. Front door lock assembly (driver side) 3. Front door switch (driver side) 4. Power window main switch (door lock/unlock switch) 5. Key switch 6. Combination meter 7. Door lock status indicator 8. Remote keyless entry receiver 9. ...