Removal and Installation

REMOVAL 1. Separate the rear propeller shaft. Refer to DLN-121, "Removal and Installation". 2. Remove right side drive shaft. Refer to FAX-24, "RIGHT SIDE : Removal and Installati ...

Ring gear shaft

Exploded View 1. Pinion lock nut 2. Companion flange 3. Drive pion oil seal 4. Pinon rear bearing 5. Transfer case 6. Gasket 7. Filler plug 8. Collapsible spacer 9. Drive pinion adjus ...

Other materials:

P range interlock door lock/unlock function does not operate
Diagnosis Procedure 1.CHECK “AUTOMATIC LOCK/UNLOCK SELECT” SETTING IN “WORK SUPPORT” 1. Select “DOOR LOCK” of “BCM” using CONSULT-III. 2. Select “AUTOMATIC LOCK/UNLOCK SELECT” in “WORK SUPPORT” mode. 3. Check “AUTOMATIC LOCK/UNLOCK SELECT” in “WORK SUPPORT”. Refer to DLK-41, "DOOR LOCK : ...

Power supply and ground circuit
Diagnosis Procedure 1.CHECK FUSE Is the fuse fusing? YES >> Replace the fuse after repairing the applicable circuit. NO >> GO TO 2. 2.CHECK GROUND CONNECTION 1. Turn ignition switch OFF. 2. Check ground connection E21 and E38. Refer to GI-44, "Circuit Inspection". ...

Precaution
Precaution for Supplemental Restraint System (SRS) "AIR BAG" and "SEAT BELT PRE-TENSIONER" The Supplemental Restraint System such as “AIR BAG” and “SEAT BELT PRE-TENSIONER”, used along with a front seat belt, helps to reduce the risk or severity of injury to the driver a ...