Nissan Juke Service and Repair Manual : Unexpected brake pedal reaction

Description

A malfunction of brake pedal feel (height or others) is detected when brake pedal is depressed.

Diagnosis Procedure

1.CHECK FRONT AND REAR AXLE

Check that there is no excessive looseness in front and rear axle.

• Front axle
- MR16DDT: Refer to FAX-9, "Inspection".

- HR16DE: Refer to FAX-41, "Inspection".

- K9K: Refer to FAX-66, "Inspection".

• Rear axle
- 2WD: Refer to RAX-4, "Inspection".

- 4WD: Refer to RAX-12, "Inspection".

Is the inspection result normal? YES >> GO TO 2.

NO >> Repair or replace error-detected parts.

2.CHECK DISC ROTOR

Check disc rotor runout.

• Front
- LHD: Refer to BR-16, "DISC ROTOR : Inspection and Adjustment".

- RHD: Refer to BR-84, "DISC ROTOR : Inspection and Adjustment".

• Rear
- LHD: Refer to BR-18, "DISC ROTOR : Inspection and Adjustment".

- RHD: Refer to BR-86, "DISC ROTOR : Inspection and Adjustment".

Is the inspection result normal? YES >> GO TO 3.

NO >> Refinish disc rotor.

• Front
- LHD: Refer to BR-16, "DISC ROTOR : Inspection and Adjustment".

- RHD: Refer to BR-84, "DISC ROTOR : Inspection and Adjustment".

• Rear
- LHD: Refer to BR-18, "DISC ROTOR : Inspection and Adjustment".

- RHD: Refer to BR-86, "DISC ROTOR : Inspection and Adjustment".

3.CHECK BRAKE FLUID LEACKAGE

Check fluid leakage.

• Front
- LHD: Refer to BR-30, "FRONT : Inspection".

- RHD: Refer to BR-97, "FRONT : Inspection".

• Rear
- LHD: Refer to BR-39, "REAR : Inspection".

- RHD: Refer to BR-105, "REAR : Inspection".

Is the inspection result normal? YES >> GO TO 4.

NO >> Repair or replace error-detected parts.

4.CHECK BRAKE PEDAL

Check each item of brake pedal.

• LHD: Refer to BR-9, "Inspection and Adjustment".

• RHD: Refer to BR-77, "Inspection and Adjustment".

Is the inspection result normal? YES >> GO TO 5.

NO >> Adjust each item of brake pedal.

• LHD: Refer to BR-9, "Inspection and Adjustment".

• RHD: Refer to BR-77, "Inspection and Adjustment".

5.CHECK BRAKING FORCE

Check brake force using a brake tester.

Is the inspection result normal? YES >> GO TO 6.

NO >> Check each components of brake system.

6.CHECK BRAKE PERFORMANCE

Disconnect ABS actuator and electric unit (control unit) connector so that ABS does not operate. Check that brake force is normal in this condition. Connect harness connectors after checking.

Is the inspection result normal? YES >> Normal

NO >> Check each components of brake system.

    Excessive operation frequency
    Description ESP function, TCS function, ABS function, EBD function and brake limited slip differential (BLSD) function operates in excessive operation frequency. Diagnosis Procedure 1.CHECK BRAK ...

    The braking distance is long
    Description Brake stopping distance is long when ABS function is operated. Diagnosis Procedure CAUTION: Brake stopping distance on slippery road like rough road, gravel road or snowy road may be ...

    Other materials:

    System
    Front wiper and washer system (with light & rain sensor) FRONT WIPER AND WASHER SYSTEM (WITH LIGHT & RAIN SENSOR) : System Diagram FRONT WIPER AND WASHER SYSTEM (WITH LIGHT & RAIN SENSOR) : System Description OUTLINE The front wiper is controlled by each function of BCM and IPDM ...

    C1604 torque sensor
    DTC Logic DTC DETECTION LOGI DTC CONFIRMATION PROCEDURE 1.PRECONDITIONING If “DTC CONFIRMATION PROCEDURE” has been previously conducted, always turn ignition switch OFF and wait at least 10 seconds before conducting the next test. >> GO TO 2. 2.DTC REPRODUCTION PROCEDURE With C ...

    Headlight switch
    Lighting 1 Turn the switch to the position: The front parking, side marker, tail, license plate, instrument lights and daytime running lights (for NISMO models) will come on. 2 Turn the switch to the position: Headlights will come on and all the other lights remain on. However, the daytime ...