Nissan Juke Service and Repair Manual : U1010 control unit (can)
Description
Initial diagnosis of A/C auto amp.
DTC Logic
DTC DETECTION LOGIC
DTC CONFIRMATION PROCEDURE
1.PERFORM SELF-DIAGNOSIS
With CONSULT-III
1. Turn ignition switch ON.
2. Select “Self Diagnostic Result” mode of “HVAC” using CONSULT-.III 3. Check DTC.
Is DTC detected? YES >> Refer to HAC-142, "Diagnosis Procedure".
NO >> INSPECTION END
Diagnosis Procedure
1.REPLACE A/C AUTO AMP.
Replace A/C auto amp. Refer to HAC-188, "Removal and Installation".
>> INSPECTION END
U1000 can comm circuit
Description CAN (Controller Area Network) is a serial communication system for real time application. It is an on-vehicle multiplex communication system with high data communication speed and exce ...B2578, B2579 In-vehicle sensor
DTC Logic DTC DETECTION LOGIC NOTE: • If DTC is displayed along with DTC U1000, first perform the trouble diagnosis for DTC U1000. Refer to HAC- 141, "DTC Logic". • If DTC is displaye ...Other materials:
CAN communication circuit
Description
CAN (Controller Area Network) is a serial communication line for real time
application. It is an on-vehicle multiplex
communication line with high data communication speed and excellent error
detection ability. Many electronic
control units are equipped onto a vehicle, and each co ...
Moonroof (if so equipped)
WARNING
• In an accident you could be thrown from the vehicle through an open moonroof.
Always use seat belts and child restraints.
• Do not allow anyone to stand up or extend any portion of their body out of the
moonroof opening while the vehicle is in motion or while the moonroof is closing. ...
Air breather hose
MR16DDT : Exploded View
1. Clip
2. Air breather hose
3. 2 way connector
MR16DDT : Removal and Installation
REMOVAL
1. Remove air cleaner case. Refer to EM-26, "Removal and Installation".
2. Remove clips (1).
: Vehicle front
3. Remove air breather hose from the 2 way connector. ...