Nissan Juke Service and Repair Manual : Tweeter
Removal and Installation
REMOVAL
1. Remove front pillar garnish. Refer to INT-18, "Exploded View".
2. Remove tweeter clip, then disconnect tweeter connector and remove tweeter.
INSTALLATION
Install in the reverse order of removal.
Front door speaker
Removal and Installation REMOVAL 1. Remove front door finisher. Refer to INT-13, "Exploded View". 2. Remove front door speaker screws, then disconnect front door speaker connector and r ...Rear door speaker
Removal and Installation REMOVAL 1. Remove rear door finisher. Refer to INT-16, "Exploded View". 2. Remove rear door speaker screws, then disconnect rear door speaker connector and remo ...Other materials:
Diagnosis and repair workflow
Work Flow
OVERALL SEQUENCE
DETAILED FLOW
1.INTERVIEW FOR MALFUNCTION
Interview the symptom to the customer.
>> GO TO 2.
2.SYMPTOM CHECK
Check the symptom from the customer's information.
>> GO TO 3.
3.BASIC INSPECTION
Check the operation of each part. Check that any s ...
B2198 nats antenna AMP.
DTC Logic
DTC DETECTION LOGIC
DTC CONFIRMATION PROCEDURE
1.PERFORM DTC CONFIRMATION PROCEDURE 1
1. Contact Intelligent Key backside to push-button ignition switch.
2. Check DTC in “Self Diagnostic Result” mode of “BCM” using CONSULT-III.
Is DTC detected?
YES >> Go to SEC-65, "D ...
U0300 can communication data
Description
CAN (Controller Area Network) is a serial communication line for real-time
application. It is an on-vehicle multiplex
communication line with high data communication speed and excellent malfunction
detection ability.
Many electronic control units are equipped onto a vehicle, and ...