Nissan Juke Service and Repair Manual : Thermo control amplifier
Removal and Installation
REMOVAL
1. Remove evaporator.
• Refer to HA-55, "EVAPORATOR : Removal and Installation". (HR16DE) • Refer to HA-115, "EVAPORATOR : Removal and Installation". (MR16DDT)
2. Remove the thermo control amp. from evaporator.
INSTALLATION
Note the following items, and then install in the reverse order of removal.
CAUTION:
• Replace O-ring with new one. Then apply compressor oil to them when
installing.
• When install the thermo control amp., set the same position before replacement.
• When remove the thermo control amp., never turn the bracket which is equipped the top of the thermo control amp.
• Check for the leakages when recharging refrigerant. Refer to HA-19, "Leak Test". (HR16DE) or HA-74, "Leak Test". (MR16DDT)
A/C control
Exploded View 1. Intake door cable 2. Air mix door cable 3. Mode door cable 4. A/C control 5. Intake door lever knob A. To intake door link B. To air mix door link C. To mode door link ...Refrigerant pressure sensor
Exploded View Refer to HA-39, "Exploded View". (HR16DE) Refer to HA-94, "Exploded View". (MR16DDT) Removal and Installation REMOVAL Remove refrigerant pressure sensor. Refe ...Other materials:
Stop lamp switch
Component Function Check
1.CHECK STOP LAMP SWITCH OPERATION
Depress brake pedal and check that stop lamp turns ON, or release brake pedal
and check stop lamp turns
OFF.
Is the inspection result normal?
YES >> GO TO 2.
NO >> Check stop lamp system. Refer to EXL-39, "Wirin ...
Service data and specifications (SDS)
Road Wheel
ALUMINUM WHEEL
STEEL WHEEL
STEEL WHEEL (EMERGENCY)
Tire Air Pressure
2WD
4WD
...
U1000 can comm circuit
Description
CAN (Controller Area Network) is a serial communication line for real time
applications. It is an on-board multiplex
communication line with high data communication speed and excellent error
detection ability. A modern
vehicle is equipped with many ECUs, and each control unit shar ...