Nissan Juke Service and Repair Manual : The braking distance is long

Description

Brake stopping distance is long when ABS function is operated.

Diagnosis Procedure

CAUTION:
Brake stopping distance on slippery road like rough road, gravel road or snowy road may become longer when ABS is operated than when ABS is not operated

.

1.CHECK BRAKING FORCE

Check brake force using a brake tester.

Is the inspection result normal? YES >> GO TO 2.

NO >> Check each components of brake system.

2.CHECK BRAKE PERFORMANCE

Disconnect ABS actuator and electric unit (control unit) connector so that ABS does not operate. Check brake stopping distance in this condition. Connect harness connectors after checking.

Is the inspection result normal? YES >> Normal

NO >> Check each components of brake system.

    Unexpected brake pedal reaction
    Description A malfunction of brake pedal feel (height or others) is detected when brake pedal is depressed. Diagnosis Procedure 1.CHECK FRONT AND REAR AXLE Check that there is no excessive loose ...

    Does not operate
    Description ABS function and EBD function does not operate. Diagnosis Procedure CAUTION: ABS function and EBD function never operate when the vehicle speed is 10 km/h (6.2 MPH) or less. 1.CHE ...

    Other materials:

    Additional service when replacing TCM
    Description Always perform the following items when the TCM is replaced. CHECK LOADING OF CALIBRATION DATA • The TCM acquires calibration data (individual characteristic value) of each solenoid that is stored in the ROM assembly (in the control valve). This enables the TCM to perform accurate ...

    Periodic maintenance
    ROAD WHEEL Adjustment BALANCING WHEELS (ALUMINUM WHEEL) Preparation Before Adjustment Using releasing agent, remove double-faced adhesive tape from the road wheel. CAUTION: • Be careful not to scratch the road wheel during removal. • After removing double-faced adhesive tape, wipe clean tra ...

    Diagnosis system (BCM)
    Common item COMMON ITEM : CONSULT-III Function (BCM - COMMON ITEM) APPLICATION ITEM CONSULT-III performs the following functions via CAN communication with BCM. SYSTEM APPLICATION BCM can perform the following functions for each system. NOTE: It can perform the diagnosis modes except the ...