Nissan Juke Owners Manual : Technical and consumer information
- Capacities and recommended fuel/lubricants
- Fuel recommendation
- Engine oil and oil filter recommendation
- Air conditioning system refrigerant and lubricant recommendations
- Specifications
- When traveling or registering your vehicle in another country
- Vehicle identification
- Vehicle Identification Number (VIN) plate
- Vehicle identification number (chassis number)
- Engine serial number
- F.M.V.S.S./C.M.V.S.S. certification label
- Emission control information label
- Tire and Loading Information label
- Air conditioner specification label
- Installing front license plate
- Vehicle loading information
- Flat towing
- Uniform tire quality grading
- Emission control system warranty
- Reporting safety defects
- Readiness for Inspection/Maintenance (I/M) test
- Event Data Recorders (EDR)
- Owner’s manual/service manual order information
Changing wheels and tires
Tire rotation NISSAN recommends rotating the tires every 5,000 miles (8,000 km). (See “Flat tire” for tire replacing procedures.) As soon as possible, tighten the wheel nuts to the specifi ...Capacities and recommended fuel/lubricants
The following are approximate capacities. The actual refill capacities may be a little different. When refilling, follow the procedure instructed in the “8. Maintenance and do-it-yourself” section ...Other materials:
P range interlock door lock/unlock function does not operate
Diagnosis Procedure
1.CHECK “AUTOMATIC LOCK/UNLOCK SELECT” SETTING IN “WORK SUPPORT”
1. Select “DOOR LOCK” of “BCM” using CONSULT-III.
2. Select “AUTOMATIC LOCK/UNLOCK SELECT” in “WORK SUPPORT” mode.
3. Check “AUTOMATIC LOCK/UNLOCK SELECT” setting in “WORK SUPPORT”.
Refer to DLK-371, "DO ...
PTC heater
Component Function Check
1.CHECK PTC HEATER OPERATION
1. Start the engine.
2. Operate fan control dial.
3. Operate temperature control dial to full hot position.
4. Check for warm air at discharge air outlet.
NOTE:
• Engine must be cold.
• Battery must be charged.
Is the inspection result ...
Wiring diagram
POWER SOCKET
Wiring Diagram
For connector terminal arrangements, harness layouts, and alphabets in a
(option abbreviation; if not
described in wiring diagram), refer to GI-12, "Connector Information/Explanation
of Option Abbreviation".
...