Nissan Juke Service and Repair Manual : TCM

Exploded View

1. Bracket


1. Bracket
2. TCM

: N·m (kg-m, in-lb):Vehicle front
Removal and Installation: N·m (kg-m, in-lb)


Removal and Installation

NOTE

:
When replacing TCM and transaxle assembly as a set, replace transaxle assembly first and then replace TCM. Refer to TM-374, "Description".

REMOVAL

1. Remove the battery. Refer to PG-124, "Removal and Installation".

2. Remove air duct (inlet) and air cleaner case. Refer to EM-26, "Removal and Installation".

3. Disconnect the TCM connector.

4. Remove the TCM.

5. Remove the bracket.

INSTALLATION

Installation is the reverse order of removal.

Adjustment

ADJUSTMENT AFTER INSTALLATION

Perform "ADDITIONAL SERVICE WHEN REPLACING TCM". Refer to TM-374, "Description".

    Transmission range switch
    Exploded View 1. Transmission range switch 2. Transaxle assem Removal and Installation REMOVAL 1. Remove battery. Refer to PG-124, "Removal and Installation". 2. Remove transmission ...

    Air breather hose
    Removal and Installation REMOVAL 1. Remove air cleaner case. Refer to EM-26, "Removal and Installation". 2. Remove clip from bracket. 3. Remove air breather hose from transaxle assembly. ...

    Other materials:

    P0340 CMP sensor (PHASE)
    DTC Logic DTC DETECTION LOGIC DTC CONFIRMATION PROCEDURE 1.PRECONDITIONING If DTC Confirmation Procedure has been previously conducted, always perform the following procedure before conducting the next test. 1. Turn ignition switch OFF and wait at least 10 seconds. 2. Turn ignition swit ...

    IGN off interlock door unlock function does not operate
    Diagnosis Procedure 1.CHECK “AUTOMATIC LOCK/UNLOCK SELECT” SETTING IN “WORK SUPPORT” 1. Select “DOOR LOCK” of “BCM” using CONSULT-III. 2. Select “AUTOMATIC LOCK/UNLOCK SELECT” in “WORK SUPPORT” mode. 3. Check “AUTOMATIC LOCK/UNLOCK SELECT” in “WORK SUPPORT”. Refer to DLK-501, "DOOR LOCK ...

    U1119 lost comm (multi-display)
    Description CAN (Controller Area Network) is a serial communication line for real-time application. It is an on-vehicle multiplex communication line with high data communication speed and excellent malfunction detection ability. Many electronic control units are equipped onto a vehicle, and ...