Nissan Juke Service and Repair Manual : System description
Cleanliness
Cleanliness RISKS ASSOCIATED WITH CONTAMINATION The high pressure direct injection system is highly sensitive to contamination. The risks associated with contamination are: • damage to or destru ...Component parts
Component Parts Location ENGINE ROOM COMPARTMENT Top View 1. Priming pump 2. Turbocharger boost control solenoid valve 3. Cooling fan motor 4. Refrigerant pressure sensor 5. IPDM E/R 6. ...Other materials:
Back door opener actuator
Diagnosis Procedure
1.CHECK BACK DOOR OPENER ACTUATOR INPUT SIGNAL
1. Turn ignition switch OFF.
2. Disconnect back door opener assembly connector.
3. Check voltage between back door opener assembly harness connector and ground.
Is the inspection result normal?
YES >> GO TO 3.
NO > ...
Rear door
Exploded View
1. Rear door panel
2. Door hinge (upper)
3. Door hinge (lower)
4. Door check link
5. Door striker
6. TORX bolt
: Do not reuse
: N·m (kg-m, in-lb)
N·m (kg-m, ft-lb)
: Body grease
Door assembly
DOOR ASSEMBLY : Removal and Installation
CAUTION:
• Perform work with 2 w ...
General Precautions
• Turn ignition switch OFF and disconnect the battery cable
from the negative terminal before connecting or disconnecting
the CVT assembly harness connector. Because battery
voltage is applied to TCM even if ignition switch is turned
OFF.
• When connecting or disconnecting pin connectors into ...