Nissan Juke Service and Repair Manual : System description
Sealant or/and Lubricant
HFC-134a (R-134a) Service Tool and Equipment • Never mix HFC-134a (R-134a) refrigerant and/or its specified lubricant with CFC-12 (R-12) refrigerant and/ or its lubricant. • Separate and non-inte ...Component parts
Component Parts Location 1. Expansion valve 2. Condenser 3. Compressor 4. Refrigerant pressure sensor 5. Liquid tank 6. Evaporator A. Built-in heater & cooling unit assembly Componen ...Other materials:
Loss of power
Description
CHART 12: LOSS OF POWER
Diagnosis Procedure
1.CHECK FUEL
Check that the fuel reservoir is correctly filled and with the right fuel.
>> GO TO 2.
2.CHECK FUEL FILTER
Check the correctness of the fuel filter.
Is the fuel filter correct?
Yes >> GO TO 3.
No >& ...
Removal and Installation
REMOVAL
1. Remove engine assembly. Refer to EM-55, "2WD : Exploded View" (2WD) ,
EM-59, "4WD : Exploded
View" (4WD).
2. Remove oil pan (lower). Refer to EM-41, "Removal and Installation".
3. Remove front cover, and other related parts. Refer to EM-67, "Explod ...
Shift position indicator circuit
Description
• TCM sends position indicator signals to combination meter by CAN
communication line.
• Manual mode switch position is indicated on shift position indicator
Component Function Check
1.CHECK SHIFT POSITION INDICATOR
CAUTION:
Always drive vehicle at a safe speed.
1. Start engine. ...