Nissan Juke Service and Repair Manual : System description
VENTILATION SYSTEM
System Description
OUTLINE
Ventilation system is controlled by A/C auto amp. (AUTOMATIC AIR CONDITIONING) or A/C control (MANUAL AIR CONDITIONING and MANUAL HEATER). For details of air conditioner system, refer to HAC-17, "System Description" (AUTOMATIC AIR CONDITIONING), HAC-203, "System Description" (MANUAL AIR CONDITIONING) or HAC-315, "System Description" (MANUAL HEATER).
AIR FLOW
Front
Rear
With rear heater duct
Without rear heater duct
Preparation
Commercial Service Tool ...Other materials:
Warning lights
All-Wheel Drive (AWD) warning light
(AWD model)
When the ignition switch is in the “ON” position, the All-Wheel Drive (AWD) warning
light will illuminate. It will turn off soon after the engine is started.
If the AWD system malfunctions or the revolution or radius of the front and the
rear ...
B2195 anti-scanning
DTC Logic
DTC DETECTION LOGIC
DTC CONFIRMATION PROCEDURE
1.PERFORM DTC CONFIRMATION PROCEDURE
1. Turn ignition switch ON.
2. Check DTC in “Self Diagnostic Result” mode of “BCM” using CONSULT-III.
Is DTC detected?
YES >> Refer to SEC-62, "Diagnosis Procedure".
NO >> ...
P062B ECM
Description
This DTC is detected when the ECM-integrated injector driver unit has a
malfunction. For injector driver unit,
refer to EC-31, "ECM".
DTC Logic
DTC DETECTION LOGIC
DTC CONFIRMATION PROCEDURE
1.PRECONDITIONING
1. Turn ignition switch OFF and wait at least 10 seconds.
...