Nissan Juke Service and Repair Manual : System description
STRUCTURE AND OPERATION
Sectional View
1. 4WD solenoid (RH) 2. Pinion rear bearing 3. Collapsible spacer 4. Pinion front bearing 5. Companion flange 6. Drive pinion 7. Gear carrier 8. Drive gear 9. 4WD solenoid (LH) 10. El ...Other materials:
Air cleaner
To remove the filter, pull the air duct1 upward to remove it. Pull the tabs 2
, then pull the cover3 upward.
The air cleaner filter should not be cleaned and reused. Replace it according
to the maintenance shown in the “NISSAN Service and Maintenance Guide”. When replacing
the filter, wipe ...
Cooling fan
Component Function Check
1.CHECK COOLING FAN FUNCTION
With CONSULT-III
1. Turn ignition switch ON.
2. Perform “COOLING FAN” in “ACTIVE TEST” mode with CONSULT-III.
3. Touch “LOW” and “Hi” on the CONSULT-III screen.
4. Check that cooling fan operates at each speed.
Without CONSULT-III
1. Pe ...
Oil filter
Removal and Installation
REMOVAL
1. Remove engine under cover.
2. Using oil filter wrench [SST: KV10115801] (A), remove oil filter.
: Vehicle front
CAUTION:
• Oil filter is provided with relief valve. Use genuine NISSAN
oil filter or equivalent.
• Be careful not to get burned when engine and ...