Nissan Juke Service and Repair Manual : System
- Engine control system
- Direct injection gasoline system
- Fuel pressure control
- Electric ignition system
- Intake valve timing control
- Exhaust valve timing control
- Turbocharger boost control
- Engine protection control at low engine oil pressure
- Air conditioning cut control
- Cooling fan control
- Starter motor drive control
- Evaporative emission system
- Automatic speed control device (ASCD)
- Speed limiter
- NISSAN dynamic control system
- Can communication
- Operation
- Speed limiter
- On board diagnostic (OBD) system
- Diagnosis system (ECM)
Structure and operation
Positive Crankcase Ventilation This system returns blow-by gas to the intake manifold. The positive crankcase ventilation (PCV) valve is provided to conduct crankcase blow-by gas to the intake ...Engine control system
Engine control system : System Diagram Engine control system : System Description ECM controls the engine by various functions. ...Other materials:
P1701 TCM
DTC Logic
DTC DETECTION LOGIC
DTC CONFIRMATION PROCEDURE
1.PREPARATION BEFORE WORK
If another "DTC CONFIRMATION PROCEDURE" occurs just before, turn ignition
switch OFF and wait for at
least 10 seconds, then perform the next test.
>> GO TO 2.
2.CHECK DTC DETECTION
1. S ...
Inspection
INSPECTION AFTER REMOVAL
Appearance
Check the propeller shaft for bend and damage. If damage is detected, replace
propeller shaft assembly.
Propeller Shaft Runout
Check propeller shaft runout at measuring points with a dial indicator.
If runout exceeds specifications, replace propeller sh ...
Condenser
Exploded View
1. Condenser
2. Condenser lower bracket RH
3. Condenser lower bracket LH
4. O-ring
5. Liquid tank braket
6. Liquid tank
7. Braket
8. O-ring
9. Refrigerant pressure sensor
: Do not reuse
: N·m (kg-m, in-lb)
: N·m (kg-m, ft-lb)
Condenser : Removal and Installation
C ...