Engine Cooling System Schematic

Periodic maintenance

Other materials:

Precaution Necessary for Steering Wheel Rotation after Battery Disconnect
NOTE: • Before removing and installing any control units, first turn the ignition switch to the LOCK position, then disconnect both battery cables. • After finishing work, confirm that all control unit connectors are connected properly, then re-connect both battery cables. • Always use CONS ...

Calibration of decel G sensor
Description TCM stores calibration data (inherent characteristic value) of G sensor to provide accurate control. Therefore, it is required to perform calibration of G sensor after the following work is performed. • Removal/installation or replacement of G sensor • Replacement of TCM Proce ...

Front wiper blade
Exploded View 1. Wiper blade 2. Wiper arm Removal and Installation REMOVAL Push up the lever (A) of wiper blade (1), while sliding wiper blade toward the direction of the arrow to remove it from wiper arm (2). CAUTION: Be careful not to drop the wiper blade onto the windshield glass. ...