Engine Cooling System Schematic

Periodic maintenance

Other materials:

Engine oil
Inspection ENGINE OIL LEVEL NOTE: Before starting engine, put vehicle horizontally and check the engine oil level. If engine is already started, stop it and allow 10 minutes before checking. 1. Pull out oil level gauge and wipe it clean. 2. Insert oil level gauge and check that the engine ...

B1106, B1107, B1108, B1109, B1110, B1111 diagnosis sensor unit
DTC Logic DTC DETECTION LOGIC DTC CONFIRMATION PROCEDURE 1.CHECK SELF-DIAG RESULT With CONSULT-III 1. Turn ignition switch ON. 2. Perform “Self Diagnostic Result” mode of “AIR BAG” using CONSULT-III. Without CONSULT-III 1. Turn ignition switch ON. 2. Check the air bag warning lamp statu ...

Microphone signal circuit
Description Power is supplied from NAVI control unit to microphone. The microphone transmits the sound voice to the NAVI control unit. Diagnosis Procedure 1.CHECK CONTINUITY BETWEEN NAVI CONTROL UNIT AND MICROPHONE CIRCUIT 1. Turn ignition switch OFF. 2. Disconnect NAVI control unit connecto ...