Nissan Juke Service and Repair Manual : Symptom diagnosis
- The parking brake release warning continues sounding, or does not sound
- The light reminder warning does not sound
- The seat belt reminder warning continues sounding, or does not sound
- The key warning does not sound (without intelligent key)
Parking brake switch signal circuit
Diagnosis Procedure 1.CHECK COMBINATION METER INPUT SIGNAL 1. Turn ignition switch ON. 2. Check the voltage between combination meter harness connector and ground. Is the inspection result norma ...The parking brake release warning continues sounding, or does not sound
Description • The parking brake warning buzzer sounds continuously during vehicle travel though the parking brake is released. • The parking brake warning buzzer does not sound at all even though ...Other materials:
S terminal circuit
Description
The output voltage of the alternator is controlled by the IC voltage
regulator at the “S” terminal detecting the
input voltage.
The “S” terminal circuit detects the battery voltage to adjust the alternator
output voltage with the IC voltage
regulator.
Diagnosis Procedure
1.CH ...
Sensor rotor
Front sensor rotor : Removal and Installation
REMOVAL
Replace wheel hub as an assembly when replacing because sensor rotor cannot
be disassembled. Refer to
FAX-43, "Removal and Installation".
INSTALLATION
Replace wheel hub as an assembly when replacing because sensor rotor cannot ...
Hazard switch
Exploded View
1. Instrument panel assembly
2. Hazard switch
: Pawl
Removal and Installation
REMOVAL
1. Remove Audio unit. Refer to AV-38, "Removal and Installation".
2. Disengage fixing pawls, and then remove hazard switch from instrument panel
inside to outside.
INSTALLATIO ...