Nissan Juke Service and Repair Manual : Symptom diagnosis
- Door does not lock/unlock with door request switch
- Door does not lock/unlock with door key cylinder operation
- Door does not lock/unlock with door lock and unlock switch
- Door does not lock/unlock with intelligent key
- Ignition position warning function does not operate
- Super lock does not operate
- Anti-hijack function does not operate
- Back door does not opened
- Auto door lock operation does not operate
- Vehicle speed sensing auto lock operation does not operate
- IGN off interlock door unlock function does not operate
- P range interlock door lock/unlock function does not operate
- Hazard and buzzer reminder does not operate
- Key reminder function does not operate
- Off position warning does not operate
- P position warning does not operate
- ACC warning does not operate
- Take away warning does not operate
- Intelligent key low battery warning does not operate
- Door lock operation warning does not operate
- Key ID warning does not operate
- Door lock status indicator does not illuminate
- Squeak and rattle trouble diagnoses
Unlock sensor
Component Function Check 1.CHECK FUNCTION 1. Select “INTELLIGENT KEY” of “BCM” using CONSULT-III. 2. Select “UNLK SEN -DR” in “DATA MONITOR” mode. 3. Check that the function operates normally acco ...Door does not lock/unlock with door request switch
All door request switches ALL DOOR REQUEST SWITCHES : Description All doors do not lock/unlock using all door request switches. ALL DOOR REQUEST SWITCHES : Diagnosis Procedure 1.CHECK REMOTE KEYLE ...Other materials:
Precaution Necessary for Steering Wheel Rotation after Battery Disconnect
NOTE:
• Before removing and installing any control units, first turn the ignition
switch to the LOCK position, then disconnect
both battery cables.
• After finishing work, confirm that all control unit connectors are connected
properly, then re-connect both
battery cables.
• Always use CONS ...
Front regulator
Exploded View
1. Front door panel
2. Lower sash (front)
3. Sealing screen
4. Pull handle bracket
5. Front door glass run
6. Front door glass
7. Power window motor
8. Front door regulator assembly
9. Lower sash (rear)
: Vehicle fro
Removal and Installation
REMOVAL
1. Remove the f ...
U1000 can comm
Description
CAN (Controller Area Network) is a serial communication line for real time
applications. It is an on-vehicle multiplex
communication line with high data communication speed and excellent error
detection ability. Modern
vehicle is equipped with many electronic control unit, and eac ...