EPS warning lamp

Component Function Check 1.CHECK THE ILLUMINATION OF THE EPS WARNING LAMP Check that the EPS warning lamp turns ON when ignition switch turns ON. Then, EPS warning lamp turns OFF after the engine ...

EPS warning lamp does not turn on

Description EPS warning lamp does not turn ON when turning ignition switch ON from OFF. (Check the illumination of the EPS warning lamp.) Diagnosis Procedure 1.CHECK EPS WARNING LAMP Perform th ...

Other materials:

On is not displayed when pressing rear window defogger switch but it is operated
Diagnosis Procedure 1.CHECK MULTI DISPLAY UNIT FUNCTION Check that the multi display unit is operating normally. • Auto A/C (4WD models). Refer to HAC-44, "Work Flow". • Auto A/C (2WD models). Refer to HAC-135, "Work Flow". Is the inspection result normal? YES >> ...

Component parts
Body control system BODY CONTROL SYSTEM : Component Parts Locatio RHD MODELS 1. BCM A. Behind of glove box (Left side) LHD MODELS 1. BCM A. Behind of instrument lower panel LH (Left side) Power consumption control system POWER CONSUMPTION CONTROL SYSTEM : Component Parts Location 1. ...

Engine does not start when intelligent key is inside of vehicle
Description Engine does not start when push-button ignition switch is pressed while carrying Intelligent Key. NOTE: • Check that vehicle is under the condition shown in “Conditions of vehicle” before starting diagnosis, and check each symptom. • The engine start function, door lock functi ...