Nissan Juke Service and Repair Manual : Special Service Tools

*: The O-ring as an unit part is set as a SST.


*: The O-ring as an unit part is set as a SST.

    Other materials:

    Door lock actuator
    Driver side DRIVER SIDE : Component Function Check 1.CHECK FUNCTION 1. Select “DOOR LOCK” of “BCM” using CONSULT-III. 2. Select “DOOR LOCK” in “ACTIVE TEST” mode. 3. Check that the function operates normally according to the following conditions. Is the inspection result normal? YES >& ...

    System
    CVT control system : System Diagram CVT control system : System Description The CVT senses vehicle operating conditions through various sensors. It always controls the optimum shift position and reduces shifting and lock-up shocks. TCM FUNCTION The function of the TCM is to: • Receive in ...

    Speed limiter main switch
    Component Function Check 1.CHECK SPEED LIMITER MAIN SWITCH FUNCTION 1. Turn ignition switch ON. 2. Check the voltage between ECM harness connector terminals under the following conditions Is the inspection result normal? YES >> INSPECTION END NO >> Go to EC-1020, "Diagnosi ...