Nissan Juke Service and Repair Manual : Shift Characteristics
Numerical value data are reference values
CAUTION:
Lock-up clutch is engaged when vehicle speed is approximately 18 km/h (11 MPH)
to 90 km/h (56 MPH).
General Specification
CAUTION: • Use only Genuine NISSAN CVT Fluid NS-2. Never mix with other fluid. • Using CVT fluid other than Genuine NISSAN CVT Fluid NS-2 will deteriorate in driveability and CVT durability, and ...Stall Speed
...Other materials:
Service data and specifications (SDS)
General Specifications
Steering Wheel Axial End Play and Play
Steering Wheel Turning Force
Steering Angle
Steering Column Operating Range
*: For measuring position, refer to ST-11, "Inspection".
Rack Stroke
Socket Swing Force
*: For measuring position, refer to ST-21, ...
Door switch
Component Function Check
1.CHECK FUNCTION
1. Select “DOOR LOCK” of “BCM” using CONSULT-III.
2. Select “DOOR SW-DR”, “DOOR SW-AS”, “DOOR SW-RL”, “DOOR SW-RR”, “BACK DOOR SW”
in
“DATA MONITOR” mode.
3. Check that the function operates normally according to the following
conditions.
Is the ...
U1010 control unit (can)
Description
Initial diagnosis of A/C auto amp.
DTC Logic
DTC DETECTION LOGIC
DTC CONFIRMATION PROCEDURE
1.PERFORM SELF-DIAGNOSIS
With CONSULT-III
1. Turn ignition switch ON.
2. Select “Self Diagnostic Result” mode of “PTC HEATER” using CONSULT-.III
3. Check DTC.
Is DTC detected?
YES & ...