Nissan Juke Service and Repair Manual : Service data and specifications (SDS)
Water outlet
Exploded View 1. Engine coolant temperature sensor 2. O-ring 3. Lock plate 4. Gasket 5. Water outlet and thermostat assembly 6. Air relief plug 7. Clamp 8. Water hose 9. Water pipe A ...Periodical Maintenance Specification
ENGINE COOLANT CAPACITY (APPROXIMATE) ...Other materials:
C1604 torque sensor
DTC Logic
DTC DETECTION LOGI
DTC CONFIRMATION PROCEDURE
1.PRECONDITIONING
If “DTC CONFIRMATION PROCEDURE” has been previously conducted, always turn
ignition switch OFF and
wait at least 10 seconds before conducting the next test.
>> GO TO 2.
2.DTC REPRODUCTION PROCEDURE
With C ...
M&A branch line circuit
Diagnosis Procedure
1.CHECK CONNECTOR
1. Turn the ignition switch OFF.
2. Disconnect the battery cable from the negative terminal.
3. Check the terminals and connectors of the combination meter for damage, bend
and loose connection
(unit side and connector side).
Is the inspection result n ...
Precaution
Precaution for Supplemental Restraint System (SRS) "AIR BAG" and "SEAT
BELT
PRE-TENSIONER"
The Supplemental Restraint System such as “AIR BAG” and “SEAT BELT PRE-TENSIONER”,
used along
with a front seat belt, helps to reduce the risk or severity of injury to the
driver a ...