Nissan Juke Service and Repair Manual : Service data and specifications (SDS)

DRIVE BELT (MR16DDT)

DRIVE BELT (MR16DDT) : Drive Belt

DRIVE BELT

DRIVE BELT (HR16DE)


DRIVE BELT (HR16DE)

DRIVE BELT (HR16DE) : Drive Belt

DRIVE BELT

Belt Deflection

*: When engine is cold.


*: When engine is cold.

Belt Tension and Frequency

*: When engine is cold.


*: When engine is cold.

DRIVE BELT (K9K)

DRIVE BELT (K9K) : Drive Belt

DRIVE BELT

ENGINE COOLANT (MR16DDT)


ENGINE COOLANT (MR16DDT)

ENGINE COOLANT (MR16DDT) : Periodical Maintenance Specification

ENGINE COOLANT CAPACITY (APPROXIMATE)

ENGINE COOLANT (HR16DE)


ENGINE COOLANT (HR16DE)

ENGINE COOLANT (HR16DE) : Periodical Maintenance Specification

ENGINE COOLANT CAPACITY (APPROXIMATE)

ENGINE COOLANT (K9K)


ENGINE COOLANT (K9K)

ENGINE COOLANT (K9K) : Periodical Maintenance Specification

ENGINE COOLANT CAPACITY (APPROXIMATE)

ENGINE OIL (MR16DDT)


ENGINE OIL (MR16DDT)

ENGINE OIL (MR16DDT) : Periodical Maintenance Specification

ENGINE OIL CAPACITY (APPROXIMATE)

ENGINE OIL (HR16DE)


ENGINE OIL (HR16DE)

ENGINE OIL (HR16DE) : Periodical Maintenance Specification

ENGINE OIL CAPACITY (APPROXIMATE)

ENGINE OIL (K9K)


ENGINE OIL (K9K) ENGINE OIL (K9K) : Standard and Limit

OIL PRESSURE

OIL CAPACITY (APPROXIMATE)


OIL CAPACITY (APPROXIMATE)

TIGHTENING TORQUE


TIGHTENING TORQUE

SPARK PLUG (MR16DDT)


SPARK PLUG (MR16DDT)

SPARK PLUG (MR16DDT) : Spark Plug

SPARK PLUG

SPARK PLUG (HR16DE)


SPARK PLUG (HR16DE)

SPARK PLUG (HR16DE) : Spark Plug

SPARK PLUG (PLATINUM-TIPPED TYPE)

ROAD WHEEL


ROAD WHEEL

ROAD WHEEL : Road Wheel

ALUMINUM WHEEL

STEEL WHEEL


STEEL WHEEL

STEEL WHEEL (EMERGENCY)


STEEL WHEEL (EMERGENCY)


    Body maintenance
    Locks, hinges and hood latch LOCKS, HINGES AND HOOD LATCH : Lubr Seat belt, buckles, retractors, anchors and adjusters SEAT BELT, BUCKLES, RETRACTORS, ANCHORS AND ADJUSTERS : Inspection For fron ...

    Other materials:

    P0197, P0198 EOT sensor
    DTC Logic DTC DETECTION LOGIC DTC CONFIRMATION PROCEDURE 1.PRECONDITIONING If DTC Confirmation Procedure has been previously conducted, always perform the following procedure before conducting the next test. 1. Turn ignition switch OFF and wait at least 10 seconds. 2. Turn ignition swit ...

    Glass
    Use glass cleaner to remove smoke and dust film from the glass surfaces. It is normal for glass to become coated with a film after the vehicle is parked in the hot sun. Glass cleaner and a soft cloth will easily remove this film. CAUTION When cleaning the inside of the windows, do not use shar ...

    CSC (concentric slave cylinder)
    Exploded View 1. Transaxle assembly 2. CSC (Concentric Slave Cylinder) : Always replace after every disassembly. : N·m (kg-m, ft-lb) Removal and Installation CAUTION: • Never reuse CSC (Concentric Slave Cylinder). Because CSC slides back to the original position every time when removi ...