Nissan Juke Service and Repair Manual : Service data and specifications (SDS)
Bulb Specifications
Rear fog lamp
Exploded View REMOVAL 1. Rear fog lamp DISASSEMBLY 1. Rear fog lamp housing 2. Rear fog lamp bulb 3. Rear fog lamp bulb sock Removal and Installation CAUTION: Disconnect battery negativ ...Other materials:
Remote keyless entry receiver
Component Function Check
1.CHECK FUNCTION
1. Select “INTELLIGENT KEY” of “BCM” using CONSULT-III.
2. Select “RKE OPE COUN1” in “DATA MONITOR” mode.
3. Check that the function operates normally according to the following
conditions.
Is the inspection result normal?
YES >> Remote keyle ...
Wiring diagram
IPDM E/R
Wiring Diagram
For connector terminal arrangements, harness layouts, and alphabets in a
(option abbreviation; if not
described in wiring diagram), refer to GI-12, "Connector Information/Explanation
of Option Abbreviation".
...
Door motor starting position reset
Description
• Reset signal is transmitted from A/C auto amp. to air mix door motor and
mode door motor. Starting position
reset can be performed.
NOTE:
During reset, DEF switch indicator blinks.
• When air mix door motor or mode door motor is removed and installed, always
perform door m ...