Nissan Juke Service and Repair Manual : Service data and specifications (SDS)
Wheel Bearing
Drive Shaft
*: For measuring position, refer to FAX-81, "WHEEL SIDE : Disassembly and Assembly" (Wheel side), FAX- 84, "TRANSAXLE SIDE : Disassembly and Assembly" (Transaxle side).
Front drive shaft
Exploded View LEFT SIDE 1. Circular clip 2. Dust shield 3. Housing assembly 4. Boot band 5. Boot 6. Damper band 7. Dynamic damper 8. Circular clip 9. Joint sub-assembly : Wheel side ...Rear Axle 2WD
...Other materials:
Precaution Necessary for Steering Wheel Rotation after Battery Disconnect
NOTE:
• Before removing and installing any control units, first turn the ignition
switch to the LOCK position, then disconnect
both battery cables.
• After finishing work, confirm that all control unit connectors are connected
properly, then re-connect both
battery cables.
• Always use CONS ...
Precautions on cruise control
• If the cruise control system malfunctions, it will cancel automatically.
The CRUISE indicator light on the meter panel will then blink to warn the driver.
• If the engine coolant temperature becomes excessively high, the cruise control
system will cancel automatically.
• If ...
Exhaust valve timing control
Exhaust valve timing control : System Diagram
Exhaust valve timing control: System Description
INPUT/OUTPUT SIGNAL CHART
SYSTEM DESCRIPTION
This mechanism hydraulically controls cam phases continuously with the fixed
operating angle of the exhaust
valve.
The ECM receives signals such ...