Nissan Juke Service and Repair Manual : Service data and specifications (SDS)

Fuel Tank

Standard and Limit

Fuel system K9K


    Evap canister
    Hydraulic Layout EVAPORATIVE EMISSION LINE DRAWING 1. EVAP canister purge volume control solenoid valve 2. Resonator 3. EVAP canister NOTE: Do not use soapy water or any type of solvent whil ...

    Other materials:

    PTC heater
    Component Function Check 1.CHECK PTC HEATER OPERATION 1. Start the engine. 2. Operate fan control dial. 3. Operate temperature control dial to full hot position. 4. Check for warm air at discharge air outlet. NOTE: • Engine must be cold. • Battery must be charged. Is the inspection resu ...

    P2122, P2123 APP sensor
    DTC Logic DTC DETECTION LOGIC NOTE: If DTC P2122 or P2123 is displayed with DTC P0643, first perform the trouble diagnosis for DTC P0643. Refer to EC-307, "DTC Logic". DTC CONFIRMATION PROCEDURE 1.PRECONDITIONING If DTC Confirmation Procedure has been previously conducted, alw ...

    Continuously Variable Transmission (CVT)
    The ignition lock is designed so that the ignition switch cannot be turned to the LOCK position until the shift lever is moved to the P (Park) position. • When turning the ignition switch to the LOCK position, make sure that the shift lever is in the P (Park) position. • When removing the ke ...