Nissan Juke Service and Repair Manual : Sectional View
1. 4WD solenoid (RH)
2. Pinion rear bearing
3. Collapsible spacer
4. Pinion front bearing
5. Companion flange
6. Drive pinion
7. Gear carrier
8. Drive gear
9. 4WD solenoid (LH)
10. Electric controlled coupling (LH)
11. Side bearing (LH)
12. Center stem
13. Rear cover
14. Side bearing (RH)
15. Electric controlled coupling (RH)
System description
STRUCTURE AND OPERATION ...Electric controlled coupling
The electric controlled coupling operates as the 4WD system. For the operation, refer to DLN-15, "Operation Principle". ...Other materials:
B1065, B1070 passenger air bag module
DTC Logic
DTC DETECTION LOGIC
DTC CONFIRMATION PROCEDURE
1.CHECK SELF-DIAG RESULT
With CONSULT-III
1. Turn ignition switch ON.
2. Perform “Self Diagnostic Result” mode of “AIR BAG” using CONSULT-III.
Without CONSULT-III
1. Turn ignition switch ON.
2. Check the air bag warning lamp statu ...
ANTI-HIJACK function does not operate
Diagnosis Procedure
1.CHECK “DOOR LOCK–UNLOCK SET” SETTING IN “WORK SUPPORT”
1. Select “DOOR LOCK” of “BCM” using CONSULT-III.
2. Select “DOOR LOCK-UNLOCK SET” in “WORK SUPPORT” mode.
3. Check “DOOR LOCK-UNLOCK SET” in “WORK SUPPORT”
Refer to DLK-371, "DOOR LOCK : CONSULT-III Function (BCM ...
C1176 stop lamp SW2
DTC Logic
DTC DETECTION LOGIC
DTC CONFIRMATION PROCEDURE
1.PRECONDITIONING
If “DTC CONFIRMATION PROCEDURE” has been previously conducted, always turn
ignition switch OFF and
wait at least 10 seconds before conducting the next test.
>> GO TO 2.
2.CHECK DTC DETECTION
With CONSULT ...