Nissan Juke Owners Manual : Seats

WARNING


WARNING

• Do not ride in a moving vehicle when the seatback is reclined. This can be dangerous. The shoulder belt will not be against your body. In an accident, you could be thrown into it and receive neck or other serious injuries. You could also slide under the lap belt and receive serious internal injuries.

• For the most effective protection when the vehicle is in motion, the seat should be upright. Always sit well back in the seat with both feet on the floor and adjust the seat properly. See “Precautions on seat belt usage” .

• After adjustment, gently rock in the seat to make sure it is securely locked.

• Do not leave children unattended inside the vehicle. They could unknowingly activate switches or controls.

Unattended children could become involved in serious accidents.

• The seatback should not be reclined any more than needed for comfort.

Seat belts are most effective when the passenger sits well back and straight up in the seat. If the seatback is reclined, the risk of sliding under the lap belt and being injured is increased.

CAUTION

When adjusting the seat positions, be sure not to contact any moving parts to avoid possible injuries and/or damage.

Front seats
Front manual seat adjustment Forward and backward: Pull the lever1 up and hold it while you slide the seat forward or backward to the desired position. Release the lever to lock the seat in posi ...

Other materials:

On board diagnostic (OBD) system
Diagnosis Description This system is an on board diagnostic system that records exhaust emission-related diagnostic information and detects a sensors/actuator-related malfunction. A malfunction is indicated by the malfunction indicator lamp (MIL) and stored in ECU memory as a DTC. The diagnos ...

Washer tank
Exploded View 1. Front washer nozzle LH 2. Front washer nozzle RH 3. Front washer tube LH 4. Front washer tube RH 5. Check valve 6. Front washer tube 7. Joint 8. Washer tank inlet cap 9. Washer tank inlet 10. Washer tank 11. Headlamp washer pump 12. Washer pump 13. Packing 1 ...

Flushing
1. Install radiator drain plug. CAUTION: Be sure to clean drain plug and install with new O-ring. Radiator drain plug : Refer to CO-17, "Exploded View". • If water drain plugs on cylinder block are removed, close and tighten them. Refer to EM-63, "Setting". 2. Remove a ...