Nissan Juke Owners Manual : Seat belt extenders

If, because of body size or driving position, it is not possible to properly fit the lap-shoulder belt and fasten it, an extender that is compatible with the installed seat belts is available that can be purchased. The extender adds approximately 8 in (200 mm) of length and may be used for either the driver or front passenger seating position.

See a NISSAN dealer for assistance with purchasing an extender if an extender is required.

WARNING

•  Only NISSAN seat belt extenders, made by the same company which made the original equipment seat belts, should be used with NISSAN seat belts.

• Adults and children who can use the standard seat belt should not use an extender. Such unnecessary use could result in serious personal injury in the event of an accident.

• Never use seat belt extenders to install child restraints. If the child restraint is not secured properly, the child could be seriously injured in a collision or a sudden stop.

    Three-point type seat belt
    WARNING • Every person who drives or rides in this vehicle should use a seat belt at all times. • Do not ride in a moving vehicle when the seatback is reclined. This can be dangerous. The should ...

    Seat belt maintenance
    • To clean the seat belt webbing, apply a mild soap solution or any solution recommended for cleaning upholstery or carpets. Then wipe with a cloth and allow the seat belts to dry in the shade. Do ...

    Other materials:

    P1804, P1809 4WD control module
    DTC Logic DTC DETECTION LOGIC DTC CONFIRMATION PROCEDURE 1.PRECONDITIONING If “DTC CONFIRMATION PROCEDURE” has been previously conducted, always turn ignition switch OFF and wait at least 10 seconds before conducting the next test. >> GO TO 2. 2.DTC REPRODUCTION PROCEDURE With ...

    Engine unit
    Disassembly 1. Remove intake manifold. Refer to EM-28, "Exploded View". 2. Remove catalyst convertor. Refer to EM-33, "2WD : Exploded View" (2WD models) or EM-34, "4WD : Exploded View" (4WD models). 3. Remove turbocharger. Refer to EM-36, "Exploded View" ...

    Front fog lamp
    Exploded View 1. Front fog lamp assembly 2. Metal clip 3. Front fog lamp bulb 4. Front fog lamp bracket 5. U nut 6. Front bumper fascia lower : Pawl : N·m (kg-m, in-lb) Removal and Installation CAUTION: Disconnect the battery negative terminal or remove the fuse. REMOVAL 1. Remove ...