Nissan Juke Service and Repair Manual : Removal and installation
Reservoir tank cap
Inspection • Check valve seat of reservoir tank cap. - Check if valve seat (A) is swollen to the extent that the edge of the metal plunger (B) cannot be seen when watching it vertically from the ...Radiator
Exploded View 1. Reservoir tank cap 2. Reservoir tank 3. Clamp 4. Reservoir tank hose 5. Mounting rubber (upper) 6. Reservoir tank hose 7. Radiator 8. Mounting rubber (lower) 9. Drain ...Other materials:
Ecu diagnosis information
BCM (body control module)
Reference Value
VALUES ON THE DIAGNOSIS TOOL
TERMINAL LAYOUT
PHYSICAL VALUES
NOTE:
• *1: Without automatic A/C
• *2: RHD models
• *3: With manual A/C
• *4: LHD models
Fail-safe
FAIL-SAFE CONTROL BY DTC
BCM performs fail-safe contr ...
P0846 transmission fluid pressure SEN/SW B
DTC Logic
DTC DETECTION LOGIC
DTC CONFIRMATION PROCEDURE
CAUTION:
Be careful of the driving speed.
1.PREPARATION BEFORE WORK
If another "DTC CONFIRMATION PROCEDURE" occurs just before, turn ignition
switch OFF and wait for at
least 10 seconds, then perform the next test.
&g ...
C1105, C1106, C1107, C1108 wheel sensor
DTC Logic
DTC DETECTION LOGIC
DTC CONFIRMATION PROCEDURE
1.PRECONDITIONING
If “DTC CONFIRMATION PROCEDURE” has been previously conducted, always turn
ignition switch OFF and
wait at least 10 seconds before conducting the next test.
>> GO TO 2.
2.CHECK DTC DETECTION
With CONSULT-I ...