Nissan Juke Service and Repair Manual : Removal and installation
MULTI DISPLAY UNIT
Exploded View
REMOVAL
Refer to IP-12, "Exploded View".
DISASSEMBLY
1. Silencer tape
2. Multi display unit
3. Silencer tape
4. Clip
5. Control finisher
Removal and Installation
REMOVAL
Refer to IP-12, "Exploded View".
CAUTION:
• When performing the work, use a shop cloth to protect the parts from damage.
• Always fix the harness clamp in position.
INSTALLATION
Install in the reverse order of removal.
Symptom diagnosis
NISSAN DYNAMIC CONTROL SYSTEM Symptom Table ...Cruise Control System
SYSTEM DESCRIPTION Information Automatic Speed Control Device (ASCD) system is controlled by ECM. Regarding the information for ASCD system, refer to EC-64, "AUTOMATIC SPEED CONTROL DEVICE ...Other materials:
Side turn signal lamp
Exploded View
1. Side turn signal lamp bulb
2. Side turn signal lamp hous
Removal and Installation
CAUTION:
Disconnect battery negative terminal or remove the fuse.
REMOVAL
1. Remove the side turn signal lamp in numerical order shown in
the figure.
2. Rotate the bulb socket counterclockw ...
Wiring diagram
ELECTRONICALLY CONTROLLED POWER STEERING SYSTEM
Wiring Diagram
For connector terminal arrangements, harness layouts, and alphabets in a
(option abbreviation; if not
described in wiring diagram), refer to GI-12, "Connector Information/Explanation
of Option Abbreviation".
...
Ecu diagnosis information
BCM
Reference Value
VALUES ON THE DIAGNOSIS TOOL
CONSULT-III MONITOR ITEM
TERMINAL LAYOUT
PHYSICAL VALUES
• *1: With manual A/C
• *2: RHD models
• *3: M/T models
• *4: LHD models
• *5: Except M/T models
Fail-safe
FAIL-SAFE CONTROL BY DTC
B ...