Nissan Juke Service and Repair Manual : Removal and installation
Battery charging chart
Slow Charge 1.DETERMINE INITIAL CHARGING CURRENT 1. Determine initial charging current from specific gravity. 2. Check battery type and determine the specified current using the table. NOTE: Af ...Battery
Exploded View 1 : Battery fix frame :N·m (kg-m, in-lb) Removal and Installation REMOVAL 1. Disconnect the battery cable from the negative terminal. CAUTION: When disconnecting, disconnect t ...Other materials:
P2118 throttle control motor
DTC Logic
DTC DETECTION LOGIC
DTC CONFIRMATION PROCEDURE
1.PRECONDITIONING
If DTC Confirmation Procedure has been previously conducted, always perform
the following procedure
before conducting the next test.
1. Turn ignition switch OFF and wait at least 10 seconds.
2. Turn ignition swit ...
P0226 APP sensor
DTC Logic
DTC DETECTION LOGIC
Diagnosis Procedure
1.CHECK GROUND CONNECTIONS
1. Turn ignition switch OFF.
2. Check ground connection E38. Refer to Ground inspection in GI-44, "Circuit
Inspection".
Is the inspection result normal?
YES >> GO TO 2.
NO >> Repair or ...
Structure and operation
Sectional View
1. Transfer cover
2. Ring gear shaft
3. Companion flange
4. Drive pinion
5. Ring gear
6. Transfer case
Operation Principle
POWER TRANSFER DIAGRAM
1. Engine
2. Transaxle
3. Transfer
4. Propeller shaft
5. Electric controlled coupling
6. Rear final drive
ELECTR ...