Nissan Juke Service and Repair Manual : Removal and installation
- Front bumper
- Rear bumper
- Front grille
- Cowl top
- Fender protector
- Sill cover
- Floor side fairing
- Fillet molding
- Roof side molding
- Door outside molding
- Door sash tape
- Rear fender cover
- Back door finisher
Symptom diagnosis
Squeak and rattle trouble diagnoses Work Flow CUSTOMER INTERVIEW Interview the customer if possible, to determine the conditions that exist when the noise occurs. Use the Diagnostic Worksheet ...Front bumper
Exploded View 1. Front side grille RH 2. Front side grille LH 3. Bumper side bracket RH 4. Front center grille 5. Emblem 6. Bumper reinforcement 7. Energy absorber 8. Bumper end rubber ...Other materials:
B2612 steering status
DTC Logic
DTC DETECTION LOGIC
NOTE:
• If DTC B2612 is displayed with DTC U1000, first perform the trouble diagnosis
for DTC U1000. Refer to
BCS-83, "DTC Logic".
• If DTC B2612 is displayed with DTC U1010, first perform the trouble diagnosis
for DTC U1010. Refer to
BCS-84, "D ...
P1726 throttle control signal
Description
Electric throttle control actuator consists of throttle control motor,
accelerator pedal position sensor, throttle
position sensor etc. The actuator sends a signal to the ECM, and ECM sends the
signal to TCM with CAN
communication.
DTC Logic
DTC DETECTION LOGIC
DTC CONFIRMATI ...
P0380 glow rela
DTC Logic
DTC DETECTION LOGIC
NOTE:
If DTC P0380 is displayed with DTC P0560 or P0657, first perform trouble
diagnosis for DTC P0560 or P0657.
Refer to EC-963, "DTC Logic" (DTC P0560) or EC-976, "DTC Logic" (DTC P0657).
Diagnosis Procedure
1.CHECK GLOW RELAY POWER SUP ...