Nissan Juke Service and Repair Manual : Removal and installation
- Hood
- Radiator core support
- Front fender
- Front door
- Rear door
- Back door
- Hood lock
- Front door lock
- Rear door lock
- Back door lock
- Fuel filler lid opener
- Door switch
- Inside key antenna
- Outside key antenna
- Intelligent key warning buzzer
- Remote keyless entry receiver
- Intelligent key battery
Squeak and rattle trouble diagnoses
Work Flow CUSTOMER INTERVIEW Interview the customer if possible, to determine the conditions that exist when the noise occurs. Use the Diagnostic Worksheet during the interview to document the fa ...Hood
Exploded View 1. Hood assembly 2. Hood bumper rubber 3. Radiator core seal 4. Hood bumper rubber 5. Clamp 6. Hood hinge 7. Grommet 8. Hood support rod : Clip : Pawl : Body grease Ho ...Other materials:
Push-button ignition switch operation
When the ignition switch is pushed without depressing the brake pedal (Continuously
Variable Transmission models) or the clutch pedal (manual transmission models),
the ignition switch position will change as follows: • Push once to change to ACC.
• Push two times to change to ON.
• Push thre ...
Intelligent Key
Replace the battery in the Intelligent Key as follows: 1. Remove the mechanical
key from the Intelligent Key.
2. Insert a small screwdriver into the slit of the corner and twist it to separate
the upper part from the lower part. Use a cloth to protect the casing.
3. Replace the battery with ...
ECU diagnosis information
ECM
Reference Value
VALUES ON THE DIAGNOSIS TOOL
Remarks:
• Specification data are reference values.
• Specification data are output/input values which are detected or supplied by
the ECM at the connector.
*Specification data may not be directly related to their components
signals/values/o ...