Precaution for Seat Belt Service

CAUTION: • Before removing the front seat belt pre-tensioner assembly, turn the ignition switch off, disconnect battery negative terminal and wait at least 3 minutes. • Do not use electrical test ...

Front seat belt

Exploded View 1. Adjuster cover 2. Anchor bolt 3. Shoulder anchor 4. Spacer 5. Retaining washer 6. Seat belt adjuster 7. Seat belt pre-tensioner retractor (Passenger side) 8. Outer anch ...

Other materials:

Brake pedal
Exploded View WITHOUT ESP 1. Clevis pin 2. Brake pedal assembly 3. Brake pedal pad 4. Stop lamp switch 5. Clip 6. Snap pin : Apply multi-purpose grease. : N·m (kg-m, ft-lb) WITH ESP 1. Clevis pin 2. Brake pedal assembly 3. Brake pedal pad 4. Brake switch/brake pedal position ...

Steering does not lock
Description Steering does not lock when door is open while ignition switch is OFF. NOTE: Before performing the diagnosis, check “Work Flow”. Refer to SEC-47, "Work Flow". Diagnosis Procedure 1.CHECK DOOR SWITCH Check door switch. Refer to DLK-87, "Component Function Check ...

Component parts
Component Parts Location 1. Back door lock assembly 2. Front door lock assembly (driver side) 3. Front door switch (driver side) 4. Power window main switch (door lock/unlock switch) 5. Key switch 6. Combination meter 7. Door lock status indicator 8. Remote keyless entry receiver 9. ...