Nissan Juke Service and Repair Manual : Removal and installation
Periodic maintenance
STEERING WHEEL Inspection STEERING WHEEL AXIAL END PLAY 1. Check installation conditions of steering gear assembly, front suspension assembly, axle and steering column assembly. 2. Check if mov ...Steering wheel
Exploded View 1. Steering wheel : Always replace after every disassembly. : N·m (kg-m, ft-lb) Removal and Installation REMOVAL NOTE: When reconnecting spiral cable, fix cable with a tape so ...Other materials:
Diagnosis system (EPS control unit)
Consult-III Function
FUNCTION
CONSULT-III can display each diagnostic item using the diagnostic test modes
shown following.
*: The following diagnosis information is erased by erasing.
• DTC
• Freeze frame data (FFD)
ECU IDENTIFICATION
Displays the part number stored in the control unit.
...
System
Warning chime system
WARNING CHIME SYSTEM : System Diagram
WARNING CHIME SYSTEM : System Description
COMBINATION METER
The combination meter sounds the alarm buzzer installed in the combination
meter when receiving the buzzer
output signal transmitted from each unit.
BCM
BCM receives si ...
B1151 curtain air bag module LH
DTC Logic
DTC DETECTION LOGIC
DTC CONFIRMATION PROCEDURE
1.CHECK SELF-DIAG RESULT
With CONSULT-III
1. Turn ignition switch ON.
2. Perform “Self Diagnostic Result” mode of “AIR BAG” using CONSULT-III.
Without CONSULT-III
1. Turn ignition switch ON.
2. Check the air bag warning lamp statu ...