Nissan Juke Service and Repair Manual : Removal and installation
Clutch fluid
RS5F92R : Inspection FLUID LEAKAGE • Check clutch line for cracks, deterioration or other damage. Replace any damaged parts. • Check for fluid leakage by fully depressing clutch pedal while engin ...Clutch pedal
LHD : Exploded View 1. Clutch pedal 2. Stopper rubber 3. Clip 4. Clutch interlock switch *1 5. Clutch pedal position switch *2 6. Pedal pad 7. Pedal stopper rubber *1 : With push-button ...Other materials:
Service
• Never use electrical test equipment to check SRS circuits unless instructed
to in this Service Manual.
• Before servicing the SRS, turn ignition switch OFF, disconnect battery
negative terminal and wait 3 minutes
or more. For approximately 3 minutes after the cables are removed, it is still ...
Electric power steering system
WARNING
• If the engine is not running or is turned off while driving, the power assist
for the steering will not work.
Steering will be harder to operate.
• When the electric power steering warning light illuminates with the engine
running, the power assist for the steering will cease ...
Precaution Necessary for Steering Wheel Rotation after Battery Disconnect
NOTE:
• Before removing and installing any control units, first turn the ignition
switch to the LOCK position, then disconnect
both battery cables.
• After finishing work, confirm that all control unit connectors are connected
properly, then re-connect both
battery cables.
• Always use CONS ...