Nissan Juke Service and Repair Manual : Removal and installation
STARTER MOTOR
HR16DE
- HR16DE : Exploded View
- HR16DE : Removal and Installation
- HR16DE : Inspection and Adjust
- MR16DDT : Exploded View
- MR16DDT : Removal and Installation
- MR16DDT : Inspection and Adjustment
Symptom diagnosis
STARTING SYSTEM Symptom Table ...HR16DE : Exploded View
REMOVAL 1. Cylinder block 2. “B” terminal harness 3. “S” terminal harness 4. Starter motor : Vehicle front : N·m (kg-m, in-lb) : N·m (kg-m, ft-lb) DISASSEMBLY Type: M000T32172ZE 1. “M” ...Other materials:
Auto operation does not operate but manual operate normally
(driver side)
Diagnosis Procedure
1.PERFORM INITIALIZATION PROCEDURE
Initialization procedure is executed and operation is confirmed.
Refer to PWC-16, "Work Procedure".
Is the inspection result normal?
YES >> INSPECTION END
NO >> GO TO 2.
2.CHECK ENCODER CIRCUIT
Check encoder c ...
B1086 seat belt Pre-tensioner LH
DTC Logic
DTC DETECTION LOGIC
DTC CONFIRMATION PROCEDURE
1.CHECK SELF-DIAG RESULT
With CONSULT-III
1. Turn ignition switch ON.
2. Perform “Self Diagnostic Result” mode of “AIR BAG” using CONSULT-III.
Without CONSULT-III
1. Turn ignition switch ON.
2. Check the air bag warning lamp statu ...
U1117 lost communication (ABS)
Description
CAN (Controller Area Network) is a serial communication line for real-time
application. It is an on-vehicle multiplex
communication line with high data communication speed and excellent malfunction
detection ability.
Many electronic control units are equipped onto a vehicle, and ...